午夜国产精品视频在线

    <code id="wb2py"><small id="wb2py"><track id="wb2py"></track></small></code>

          1. <tr id="wb2py"><sup id="wb2py"></sup></tr>

            657685223

            Shun Chuan Precision Machinery Co., Ltd.

            Tel:886-37-741591       Fax:886-37-741593
            Address:No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan

            Products

            High Speed Precision Lathes

            High-Speed-Precision-Lathes-1

            • Model No: AHL-21120
            • Factory Location: Taiwan
            • Sample Request: No
            • Target Markets: Worldwide

            Detail Information

            Description :

            ?All castings are properly stabilized and stress relieved.
            ?Bed ways are hardened & ground to min. HS-70.
            ?Turcite B coating between the bed and carriage.
            ?Extremely low noise level.
            ?Foot brake pedal provided.
            ?Built-in coolant pump & fitting provided.
            ?CSS (constant surface speed control) on request for E.V.S. model
            ?Wider bed way which give absorbs vibration.
            ?All models with mechanical clutch. (excluded E.V.S. model)
            ?All models with auto lubrication system to headstock & external tank for cooling the oil
            ?All models meet CE. (on request)
            ?All models with 80mm (3.149") spindle bore, ASA D1-8.

            Specification :

            STANDARD ACCESSORIES:
            1. Backplate for 12" chuck
            2. Dead center MT.5
            3. Dead center MT.5 with carbide tip
            4. Spindle center sleeve MT.7
            5. Level pads......8 pcs
            6. Tool set & Box
            7. Operation manual & parts list
             
            OPTIONAL ACCESSORIES:
            1. 3-Jaws scroll 12" chuck
            2. 4-Jaws independent chuck 12" for 18....or 14" for 21...
            3. 5C collet closer attachment
            4. 5C collets (metric or inch)
            5. Chuck safety guard
            6. Hydraulic copying attachment
            7. Tool post grinder attachment
            8. Taper turning attachment
            9. Electrical system for CE
            10. Protect cover on leadscrew for CE
            11. Steady rest w/ball bearing
            12. Follow rest w/bronze tip
            13. Faceplate 14"
            14. Drill chuck & arbor
            15. Rotating center MT.5
            16. Halogen lamp
            17. Quick change tool post
            18. Carriage micro stop set
            19. Digital read out system
            20. Full length splash guard

            SPECIFICATIONS:

            MODELAHL-1840
            AHL-1860
            AHL-1880
            AHL-2140
            AHL-2160
            AHL-2180
            AHL-21120
            AHL-1840V
            AHL-1860V
            AHL-1880V
            AHL-2140V
            AHL-2160V
            AHL-2180V
            AHL-21120V
            CapacityHeight of centers231 mm (9.09")271 mm (10.67")231 mm (9.09")271 mm (10.67")
            Swing over bedØ462 mm (18.19")Ø542 mm (21.34")Ø462 mm (18.19")Ø542 mm (21.34")
            Swing in gapØ710 mm (27.95")Ø790 mm (31.10")Ø710 mm (27.95")Ø790 mm (31.10")
            Swing over cross slideØ298 mm (11.73")Ø380 mm (14.96")Ø298 mm (11.73")Ø380 mm (14.96")
            Distance between centers1000 mm (40")1500 mm (60")2000 mm (80")1000 mm (40")1500 mm (60")2000 mm (80")3000 mm (120")1000 mm (40")1500 mm (60")2000 mm (80")1000 mm (40")1500 mm (60")2000 mm (80")3000 mm (120")
            Width of bed345 mm (13.58")
            Gap width in front of faceplate250 mm (9.84")
            Headstock and Main SpindleSpindle nose, internal taperD1-8, MT.No.7
            Spindle center sleeveMT. No.7 x MT. No.5
            Spindle boreØ80 mm (3.149")
            Spindle speed:Gear steps / Range
            16 steps / 20~1600 R.P.M.
            Green2065210670
            Yellow2585280900
            Red351153801200
            Blue501505001600
            "MATRIX" Disc clutch for Forward / Reverse

            4 steps /
            L18~55 R.P.M.
            M55~180 R.P.M.
            MH180~600 R.P.M.
            H600~1800 R.P.M.
            Infinitely variable
            CarriageLength on bed / Width of carriage543 mm (21.37") / 542 mm (21.33")
            Cross slide travel272 mm (10.7")
            Top slide travel137 mm (5.39")
            Threads and FeedsWhitworth threads: Kinds / Range38 Kinds / 2~72 T.P.I.
            Metric threads: Kinds / Range40 Kinds / 0.4~14 mm
            D.P. threads: Kinds / Range21 Kinds / 8~44 D.P.
            M.P. threads: Kinds / Range18 Kinds / 0.3~3.5 M.P.
            Longitudinal feeds0.04~1.0 mm (0.0015"~0.04")
            Cross feeds0.02~0.5 mm (0.00075"~0.02")
            TailstockQuill diameterØ76 mm (3")
            Quill travel165 mm (6.5")
            Taper of centerMT.No.5
            MotorMain spindle10HP12.5HPAC 7.5kW (10HP)AC 9.4kW (12.5HP), Inverter
            Forced lubrication for HD.--1/4HP
            Coolant pump1/8HP
            MeasurementWeight (Net /Gross) Approx.2000 kgs / 2350 kgs2350 kgs / 2700 kgs2700 kgs / 3100 kgs2300 kgs / 2650 kgs2650 kgs / 3000 kgs3000 kgs / 3400 kgs3700 kgs / 4200 kgs2000 kgs / 2350 kgs2350 kgs / 2700 kgs2700 kgs / 3100 kgs2300 kgs / 2650 kgs2650 kgs / 3000 kgs3000 kgs / 3400 kgs3700 kgs / 4200 kgs
            Packing sizesLength2535 mm (99.8")3035 mm (119.5")3535 mm (139.2")2535 mm (99.8")3035 mm (119.5")3535 mm (139.2")4624 mm (182")2535 mm (99.8")3035 mm (119.5")3535 mm (139.2")2535 mm (99.8")3035 mm (119.5")3535 mm (139.2")4624 mm (182")
            Width x HeightWidth 1120 mm (44.1") x Height 1900 mm (74.8")

            Specifications subject to change without notice.

             

            Shun Chuan Precision Machinery Co., Ltd.

            • Taiwan
            • No. 5, Lin 1, Shan Kan Li, Yuan Li Town, Miaoli 35873, Taiwan
            • 886-37-741591
            • 886-37-741593
            • 657685223
            午夜国产精品视频在线

              <code id="wb2py"><small id="wb2py"><track id="wb2py"></track></small></code>

                    1. <tr id="wb2py"><sup id="wb2py"></sup></tr>